TIME ALPE D'HUEZ 23 ROAD BIKE BUILD

The Time Alpe D’Huez 23 is a lightweight climbing frame designed to tackle to toughest gradients. The newly updated 23’ model comes with fully integrated cables and an unbelievable chrome paint-scheme. We specced this out with SRAM Red groupset and the Zipp 353 NSW wheelset to keep the weight to a minimum.

Build Specification:

-TIME Alpe D’Huez 23 frameset

-SRAM Red groupset

-Zipp 353 NSW wheelset

-Vittoria NEXT 28mm tyres

-Deda Alenera bar/stem

-Zipp Speed SL seatpost

-Selle San Marco Shortfit saddle

VIELO R + 1 CUSTOM BUILD ROAD BIKE

The Vielo R+ 1 frameset has been optimised for a 1X set up from the ground up. The Alto model weigh’s just 880g (raw) and this weight saving combined with an incredibly aerodynamic design means this bike will climb as well as anything but also hold its speed on the flat. The SRAM Red 1X groupset helps to reduce weight and keep the overall setup slick.

The secret weapon…the Classified R50 wheelset. This is the latest technology that essentially moves your front derailleur into you hub. Why? It cleans up the airflow around your crankset by running a single chainring and no front derailleur. For some people the 1X set up limits the gear range but this is where the classified hub comes in to allow you to drop your gear to 0.7 of the current gearing (e.g from 50T to 35T). The second benefit of moving gears into the hub is allowing you to change gear under load. You can be pedalling at up to 1000w and with a press of a button the hub seamlessly changes your ratio.

Build Specification:

-Vielo R + 1 frameset

-SRAM Red groupset with Vielo crankset

-Classified 50mm wheelset

-Schwalbe Pro 1 tyres

-Selle San Marco saddle

SARTO LAMPO PLUS CUSTOM BUILD

The Sarto Lampo Plus is as slippery as they come. An out and out aero race machine designed to hold speed. This one, equipped with Zipp 454 NSW wheels, SRAM Red AXS and full Ceramicspeed upgrade package ensures no power is wasted.

Build Specification:

-Sarto Lampo Plus frameset with cockpit

-SRAM RED AXS Groupset

-Zipp 353 NSW wheelset

-Ceramicspeed BB, pulleys and wheel bearings

-Specialized power 3D saddle

SARTO SETA PLUS CUSTOM BUILD

The Sarto Seta Plus definitely falls into the dream bike category. The frame is designed to be an all-rounder, light enough to feel responsive on any climb, aero enough to hold speed on the flat and perfectly balance to tear down any descent. The customer opted for an understated design with black logo’s on a raw carbon frame. The stealth look is something to behold and also has the added benefit of keeping the weight to a minimum. The weight saving continued with the 1255g Zipp 353 NSW’s and superlight SRAM Red AXS groupset.

Build Specifcation:

-Sarto Seta Plus frameset

-SRAM Red AXS groupset

-Zipp 353 NSW wheelset

-ENVE 31mm Tyres

-Selle San Marco Saddle

SARTO LAMPO CUSTOM BUILD

The Sarto Lampo is an out and out race machine designed to be ridden at speed. The aero frameset allows you to cut through the wind and with this set up we went for a deep set of wheels, the Scope R5’s and fully integrated front end to make sure it’s as fast as possible. The customer opted for a 1X set up with single chainring on the front to save weight and to give a clean airflow while the 10-36T gives a wide gear ratio for climbing on all terrain.

Build Specification:

-Sarto Lampo Plus frameset

-SRAM Force AXS 1X groupset with Ingrid crankset

-Scope R5 wheelset

-Hutchinson Fusion 5 tyres

-Selle San Marco saddle

JGUILLEM ORIENT CUSTOM BUILD

‘The nicest titanium bike I have ever seen’ I think we’ll agree with Jimmi’s opinion on that one! The Orient has the most unique lines of any frameset and offers an incredibly comfortable yet fast ride. We equipped this with SRAM Force AXS and Zipp 404 Firecrest wheels to help it cut through the air at speed whilst looking…incredible!

Build Specification:

-JGuillem Orient frameset 56cm

-SRAM Force groupset with Rotor crankset

-Zipp 404 Firecrest wheelset

-Hutchinson Fusion 30mm Tyres

-Selle San Marco Dynamic Shortfit Saddle

-Zipp Bar and Stem

-USE Duro Carbon Seatpost

JGuillem Orient build shot by JImmi D Nichols

TOMMASINI X-FIRE BUILD WITH ENVE AND ZIPP

A handmade steel Italian from Tommasini assembled with the most modern components available. This X-Fire has been painted to give a stand-out colour-scheme which will turn heads at every cafe stop. The steel frame still offers the ride of a classic road bike but the modern day touches are obvious throughout the build. Integrated cable routing, wireless gears, disc brakes and the latest ENVE SES wheelset with hookless rims ensure the bike will outperform any of its predecessors but there’s still a nod to the past with the feel of steel.

Build Specification

-Tommasini X-Fire Stainless Steel Disc Frameset

-ENVE SES 4.5 Wheelset

-Sram Red AXS eTap Groupset

-Goodyear Eagle F1 Tyres

-Fizik 3D Printed Saddle

-USE carbon Seapost

-FSA Internally Routed Stem & Carbon Bars

Tommasini X-Fire custom build shot by Jimmi D Nichols

TOMMASINI X-FIRE CUSTOM BUILD

The Italian dream build. Classic in appearance but assembled with modern day components to give something unique in ride quality and appearance. The Tommasini X-Fire frameset has custom made Columbus tubing to absorb road vibration while providing a stiff and responsive setup. The customer opted for a classic rim-brake set up with Campagnolo Chorus Mechanical and Shamal Ultra wheels. This is a bike that radiates class and is a dream build for anyone with a true passion for the sport.

Build Specification:

- Tommasini X-Fire frameset

-Campagnolo Chorus 12 Speed Groupset

-Campagnolo Shamal Ultra Wheelset

-Pirelli Tyres

-Zipp Service Course Bar and Stem

-USE Dura Seatpost

-Selle San Marco Saddle

Tommasini X-Fire custom build filmed by Jimmi D Nichols